smartonline 208/230v 3kva 2.7kw double- conversion ups, 2u rack/tower, extended run, network card slot, lcd, usb, db9 model number: SUINT3000LCD2U high-performance on-line double-conversion ups with interactive lcd interface ideal for any critical voice, data, medical or industrial it application. converts ac input to dc and then fully regulated sine wave ac power. description the SUINT3000LCD2U smartonline? 3000va/2700w on-line double-conversion ups converts ac input to dc power, and then converts dc to fully regulated sine wave ac output with +/-2% voltage regulation in online and battery modes. an interactive front-panel lcd interface provides detailed real- time ups status and advanced setup and configuration options. in case of ac power outage, the internal batteries support 13.5 minutes of runtime at half load and five minutes at full load. extended runtime is possible with optional external battery packs. ?smart? battery packs, such as tripp lite?s bp72v18-2us, are automatically sensed and configured during replacement. an intelligent battery management system extends battery life. managing the ups is simplified through the interactive front-panel lcd interface, which displays operating conditions and diagnostic data, such as load and battery levels. you can set power strategies to reflect your protection priorities, whether it?s precise power quality for sensitive systems or the highest possible electrical efficiency, all while ensuring 100% uptime for your systems. power is filtered to protect connected equipment against surges and emi/rfi line noise that can damage equipment or destroy data. tested to international and north american ce, iec62040-1: 2008, ul 1778, csa, saso and eac standards for applications worldwide. adding an optional network management card permits remote management of the ups, including reboots and activity logs. features protects mission-critical rack-mounted equipment converts ac input to dc power, then dc to fully regulated sine wave ac output l +/-2% voltage regulation in online and battery modes l selectable 200/208/220/230/240v output voltage l 3000va/2700w capacity l highlights zero transfer time suitable for advanced network applications l 2% output voltage regulation in online and battery modes l selectable 200/208/220/230/240v output voltage l features 2 c19 and 8 c13 outlets l package includes SUINT3000LCD2U smartonline 3000va/2700w on-line double-conversion ups l 4-post rack-mount installation kit l usb cable l rs-232 cable l c19-to-c20 power cable l (2) c13-to-c14 power cables l owner?s manual l 1 / 7
2 c19 and 8 c13 outlets l 570-joule surge suppression rating l supports tower installation with 2-9ustand accessory l interactive front-panel lcd reports detailed status information, including load and battery levels l offers advanced configuration options, including output voltage and power strategies l 5 power strategies auto adaptive enables high efficiency and high-quality operation as necessary for ideal equipment protection l max efficiency favors economy operation with high 95% efficiency l max quality favors on-line, double-conversion mode, maintaining +/-2% output voltage regulation and zero transfer time l frequency regulation and frequency conversion enable +/-0.05 hz output regulation for selected frequency (50/60 hz) l reliable, expandable battery backup supports half load (1350w) for 13.5 min. and full load (2700w) for 5 min. l add external battery packs for extra runtime l ?smart? battery packs, such as tripp lite?s bp72v18-2us, are automatically sensed and configured during replacement l full 2700w capacity available with and without external battery packs l battery independent restart ensures automatic ups power-up after lengthy power outages, even with expired batteries l highly customizable customize communications and behavior to integrate with device makers? specific needs l selectable auto-restart from 0 to 60 sec. after ac power is restored l selectable minimum battery charge level before auto-restart l schedule system reboot if usb signal from connected device is lost l set overload thresholds and low battery levels for alert and shutdown l remote on/off (toggle) support via db9 l certified for worldwide use tested to international and north american ce, iec62040-1: 2008, ul 1778, csa, saso and eac standards for applications worldwide l optional network management cards / usb & serial ports compatible tripp lite ups management cards webcardlx and snmpwebcard support a wide variety of ups control and monitoring capabilities l usb & serial ports enable data-saving unattended shutdown when used with tripp lite's poweralert l 2 / 7
specifications software, available via free download from www.tripplite.com/poweralert overview upc code 037332185631 output output volt amp capacity (va) 3000 output kva capacity (kva) 3 output watt capacity (watts) 2700 output kw capacity (kw) 2.7 output capacity details de-rating information: max output in frequency conversion mode is reduced to 1890 watts for 208/220/230/240v output voltages; max output is reduced to 2160w at 200v output voltage in all operating modes overload capacity: supports inverter operation up to 105% load continuously, 125% for 3 minutes, 150% for 30 seconds and >150% for 0.5 seconds before switching to bypass (when bypass input voltage and frequency are within bypass limits) or shutdown (when bypass input voltage or frequency are outside bypass limits). power factor 0.9 crest factor 3:1 nominal output voltage(s) supported 200v; 208v; 220v; 230v; 240v nominal voltage details nominal output voltage is user configured on first power-on frequency compatibility 50 / 60 hz; supports 50 to 60 hz and 60 to 50 hz conversion frequency compatibility details output frequency matches input nominal on startup; output capacity de-rates by 30% during frequency conversion operation output voltage regulation (line mode) +/- 2% output voltage regulation (economy line mode) +/- 10% output voltage regulation (battery mode) +/- 2% output receptacles (8) c13; (2) c19 included output power cables includes 2 c13 to c14 and 1 c19 to c20 power cables load management receptacles two switchable 4 outlet load banks (3 c13 and 1 c19 per bank) output ac waveform (ac mode) pure sine wave output ac waveform (battery mode) pure sine wave individually controllable load banks yes input 3 / 7
rated input current (maximum load) 14.97a nominal input voltage(s) supported 200v ac; 208v ac; 220v ac; 230v ac; 240v ac ups input connection type c20 inlet input phase single-phase battery full load runtime (min.) 5 min. (2700w) half load runtime (min.) 13.5 min. (1350w) expandable battery runtime supports extended runtime with optional external battery packs external battery pack compatibility bp72v15-2u (limit 1); bp72v28rt-3u (multi-pack compatible); bp72v18-2us (multi-pack compatible) dc system voltage (vdc) 72 battery recharge rate (included batteries) 3.0 hours from 10% to 90% (typical, full load discharge) internal ups replacement battery cartridge rbc72s battery access front panel battery access door battery replacement description hot-swappable, replaceable batteries expandable runtime yes voltage regulation voltage regulation description online, double-conversion power conditioning overvoltage correction 2% output voltage regulation during overvoltages to 288 undervoltage correction 2% output voltage regulation during undervoltages to 160v (100% load), 130v (70% load), 100v (30% load) user interface, alerts & controls front panel lcd display interactive front-panel lcd interface reports ups operating mode, detailed ups status and site-power information; lcd interface also enables a variety of advanced ups setup and configuration options switches 5 front panel switches: on/off, up, down and escape alarm cancel operation power-fail alarm can be silenced by following on-screen prompts audible alarm audible alarm indicates power failure, low battery, overload and fault led indicators 4 front panel leds: ac input (green), ac output (green), battery (yellow), fault (red) surge / noise suppression ups dataline suppression details single line dialup / network dataline protection included emi / rfi ac noise suppression yes ac suppression joule rating 570 4 / 7
ac suppression response time instantaneous physical included mounting accessory description 4 post installation accessories included installation form factors supported with included accessories 4 post 19 inch rackmount installation form factors supported with optional accessories 2 post rackmount (2postrmkitwm); 2-4 post front rail rackmount (upshdearkit); tower (2-9ustand) primary form factor rackmount ups power module dimensions (hwd, in.) 3.46 x 17.24 x 24.25 ups power module dimensions (hwd, cm) 8.79 x 43.79 x 61.60 rack height 2u minimum required rack depth without external battery pack (cm) 70 minimum required rack depth with external battery pack (cm) 90 minimum required rack depth without external battery pack (in.) 27.75 minimum required rack depth with external battery pack (in.) 35.25 ups power module weight (lbs.) 68.72 ups power module weight (kg) 31.17 shipping dimensions (hwd / in.) 9.45 x 23.62 x 29.92 shipping dimensions (hwd / cm) 24.00 x 59.99 x 76.00 shipping weight (lbs.) 84.22 shipping weight (kg) 38.20 cooling method fan ups housing material metal primary ups height (mm) 88 primary ups width (mm) 438 primary ups depth (mm) 616 environmental operating temperature range +32 to +104 degrees fahrenheit / 0 to +40 degrees celsius. storage temperature range +5 to +122 degrees fahrenheit / -15 to +50 degrees celsius. relative humidity 5 to 95%, non-condensing ac mode btu / hr. (full load) 933 5 / 7
? 2019 tripp lite. all rights reserved. all product and company names are trademarks or registered trademarks of their respective holders. use of them does ac economy mode btu / hr. (full load) 485 battery mode btu / hr. (full load) 1399 ac mode efficiency rating (100% load) >90% ac economy mode efficiency rating (100% load) >95% audible noise <50db at front side 1m communications communications interface usb (hid enabled); db9 serial; contact closure; epo (emergency power off); slot for snmp/web interface network management cards snmpwebcard; webcardlx poweralert software for local monitoring via the ups?s built-in communication ports, download poweralert local software at http://www.tripplite.com/poweralert communications cable usb and db9 cabling included watchdog compatibility supports watchdog application, os and hard-reboot restart options for remote applications line / battery transfer transfer time no transfer time (0 ms.) in online, double-conversion mode; 4 ms. transfer time during economy mode operation low voltage transfer to battery power (setpoint) 160v (100% load), 140v (66% load), 120v (33% load) high voltage transfer to battery power (setpoint) 288v special features grounding lug back panel grounding lug included cold start (startup in battery mode during a power failure) cold-start operation supported high availability ups features automatic inverter bypass; hot swappable batteries green energy-saving features high efficiency economy mode operation; individually controllable load banks certifications ups certifications ce; meets fcc part 15 category a (emi); tested to csa (canada); tested to eac (belarus, kazakhstan, russia); tested to saso (saudi arabia); tested to ul1778 (usa) ups certification details meets emi approvals iec62040-2:2006; fcc part 15 warranty product warranty period (worldwide) 2-year limited warranty connected equipment insurance (u.s., canada & puerto rico) $250,000 ultimate lifetime insurance 6 / 7
not imply any affiliation with or endorsement by them. tripp lite has a policy of continuous improvement. specifications are subject to change without notice. tripp lite uses primary and third-party agencies to test its products for compliance with standards. see a list of tripp lite's testing agencies: https://www.tripplite.com/products/product-certification-agencies 7 / 7
|
